爱普生清零英文版怎么用

1. To perform a factory reset, please follow the steps below.

2. Firstly, be sure to disconnect the printer’s power plug from the wall.

3. Secondly, press and hold the feed button while plugging in the power.

4. Thirdly, continue to hold the feed button until the printer enters service mode (or recovery mode).

5. The power light should flash fast, indicating that the printer is in service mode.

6. When it is in service mode, press the feed button three times.

7. The power light should now flash slowly, indicating that the printer is in reset mode.

8. When the power light is flashing slowly, press and hold the feed button for 5 seconds.

9. The printer should now perform a factory reset, and the power light should be steady on.

10. Finally, unplug the power plug from the wall and wait for the printer to reboot.

11. Once the printer is back in normal operation mode, the factory reset should be complete.

Once you have completed the steps above, you have successfully reset your Epson printer to its factory settings. You will need to update the printer’s settings and re-configure the printing preferences in order to make it ready for use. For more information about configuring the printer, please consult the printer’s user manual.